Crash-Rated Anti-Ram Bollard Installation
Engineered to certified impact standards — crash-rated bollards that physically stop vehicles at speed. The only bollard type with independently tested and verified performance ratings. Protecting properties in Edmonton, Calgary, Red Deer, and Lethbridge.
Specialized Protection
Crash-Rated Bollards
Crash-rated bollards are independently tested and certified to stop vehicles of specific weights traveling at specific speeds. Unlike standard commercial fixed bollards that provide effective protection against accidental vehicle strikes, crash-rated bollards are engineered to a precise performance standard — most commonly ASTM F2656 (formerly DOS SD-STD-02.01) — and are verified through full-scale vehicle crash testing. They represent the highest tier of bollard protection available in Edmonton, Calgary, and across Alberta.
ASTM
Certified
100%
Full-Service Install
What We Install
Crash-Rated Bollards Bollard Solutions
Crash-rated bollards are primarily specified for government buildings, military facilities, embassies, critical infrastructure, and high-security commercial properties where a formal security risk assessment has identified a credible threat of deliberate vehicle attack. They are significantly more expensive than standard fixed bollards ($3,000–$25,000+ per unit vs. $400–$1,250) and require engineered foundations 48–72 inches deep. Crash-rated installations at federal sites and critical infrastructure typically require approved security drawings before work begins — for general permit and locate requirements, see Do I need a permit to install bollards in Alberta?. For the vast majority of commercial properties — daycares, retail storefronts, banks, parking lots — standard fixed bollards provide more than adequate protection at a practical price point. Titan Barriers will always recommend the right level of protection for your actual risk profile as part of our complete bollard installation services.
Government & Municipal
ASTM-rated bollards for government buildings, courthouses, municipal offices, and public infrastructure requiring certified vehicle barrier protection.
Critical Infrastructure
Crash-rated bollard systems for power plants, water treatment facilities, communications hubs, and other critical assets requiring high-security perimeter protection.
Financial Institutions
Anti-ram bollards for bank branches, data centres, and financial facilities vulnerable to vehicle-borne attacks and ram-raid theft attempts.
Embassy & Diplomatic
Certified perimeter bollard systems meeting international security standards for diplomatic facilities and foreign mission buildings.
Healthcare & Education
Crash-rated bollards protecting hospitals, schools, and campus facilities where large gatherings create high-consequence vehicle attack targets.
Event & Public Venues
Permanent crash-rated bollard installations at stadiums, convention centres, and public gathering spaces with significant pedestrian density.
Free Tool · 60 Seconds
Not sure how many bollards you need?
Try our free Bollard Calculator — answer 6 quick questions and get a tailored recommendation: bollard count, diameter, spacing, foundation, finish, and excavation method. Built for Alberta commercial sites.
"The certification documentation Titan provided was exactly what our security auditors needed. Every rebar placement photographed, every foundation depth verified. No gaps."
— Security Director, Government Facility, Alberta
Everything's Handled
Certified Performance — Not Marketing Claims
Every crash-rated bollard we install comes with manufacturer certification documentation referencing the specific ASTM F2656 rating — including the vehicle weight class, impact speed, and penetration distance verified during testing. This is not a marketing claim; it is an independently tested and audited performance standard.
Installation follows the manufacturer's certified foundation specification exactly. Crash-rated bollards derive their stopping force from a precisely engineered relationship between the bollard, the foundation, the rebar cage, and the concrete mass. Deviating from the certified foundation design voids the crash rating.
We provide as-built documentation confirming that the installation matches the certified specification — including rebar placement photos, concrete test results, and foundation depth verification. This documentation is essential for facilities requiring security audit compliance.
Why Choose Titan
Built Different
We evaluate your security requirements and recommend the appropriate crash rating for your facility's threat profile.
Independent ASTM F2656 crash test certification — the international standard for vehicle barrier performance.
Crash-rated bollards meeting government and military security specifications for facility perimeter protection.
Stainless steel sleeves and architectural powder coats available to complement building design without compromising ratings.
Materials and foundations specified for Alberta's extreme temperature range and freeze-thaw conditions.
Crash-rated bollard installation across Edmonton, Calgary, and all Alberta locations requiring certified protection.
Why It Matters
When Standard Bollards Aren't Enough
Standard commercial fixed bollards provide effective protection against accidental vehicle strikes and low-speed impacts — but they are not designed or tested to stop deliberate vehicle attacks at speed. Crash-rated bollards fill this gap with engineered, tested, and certified performance against specific threat scenarios defined by organizations like ASTM International and the U.S. Department of State.
Independently Tested
Performance verified through full-scale vehicle crash testing — not theoretical calculations or marketing claims.
Certified Ratings
ASTM F2656 certification specifies exactly what vehicle at what speed the bollard will stop — documented and auditable.
Engineered Foundations
Crash-rated foundations use rebar cages, specified concrete strengths, and exact dimensions that are integral to the rating.
Built to Last
Engineering-Grade Construction
Crash-rated bollards use significantly heavier steel sections than standard commercial bollards — typically thick-wall structural steel pipe or solid steel cores with engineered base plates welded to rebar cages. The bollard, foundation, and anchorage system function as a single engineered unit; no component can be substituted without affecting the crash rating.
Foundations for crash-rated bollards are typically 48–72 inches deep with reinforced concrete and rebar configurations specified by the manufacturer's crash test certification. We follow these specifications exactly and document compliance with photographic evidence at each construction stage.
Surface finishes on crash-rated bollards range from industrial galvanized for utilitarian applications to architectural stainless steel sleeves and powder coats for facilities where the bollard's appearance must complement the building design without compromising the rating.
"The foundation specification alone was more detailed than most complete bollard installations we've seen. Rebar spacing, concrete PSI, curing requirements — everything documented to maintain the crash certification."
— Civil Engineer, Edmonton
Specification Matters
Crash-Rated Means Certified — Not Just Heavy
A Thick Bollard Is Not a Crash-Rated Bollard
Crash-rated bollards carry ASTM F2656 or PAS 68 certification — meaning they've been physically tested against a specific vehicle weight at a specific speed, with measured penetration distances. A heavy steel bollard without certification is just a heavy bollard — it may or may not stop the threat vehicle. For most commercial properties, standard fixed bollards provide more than enough protection at a fraction of the cost. Crash-rated systems are engineered for government, military, embassies, and critical infrastructure facing deliberate vehicle attacks.
Foundation Specifications Are Non-Negotiable
Crash-rated bollards require manufacturer-specified foundation systems — often engineered reinforced concrete footings 4–6+ feet deep with specific rebar configurations. Installing a certified bollard on a non-certified foundation voids the rating entirely. If your installer doesn't follow the exact foundation specification from the bollard manufacturer, you're paying crash-rated prices for standard bollard performance.
Most Commercial Properties Don't Need Crash-Rated
Unless your facility has a specific threat assessment identifying deliberate vehicle-ramming as a credible risk — or a government mandate requiring certified barriers — standard fixed bollards at $600–$900 per unit will stop the accidental vehicle strikes that represent 99%+ of real-world bollard impacts. We'll always give you an honest recommendation: if fixed bollards solve your problem, we'll tell you — even though crash-rated bollards are a larger sale.
Material Specifications
Specifications & Materials
Full Transparency
By the Numbers
Every crash-rated bollard carries independent ASTM F2656 certification with documented test results.
Standard ASTM M30 rating stops a 15,000 lb vehicle at 30 mph — verified through full-scale crash testing.
Crash-rated foundations extend 48–72 inches deep with engineered rebar cages and specified concrete strengths.
P1 rating means the vehicle does not penetrate more than 1 meter past the bollard line after impact.
Every construction stage is photographed and documented for security audit compliance and certification records.
Heavy-wall steel and engineered foundations provide 50+ years of certified protection with minimal maintenance.
Investment Guide
Crash-Rated Bollards Cost
$3,000–$6,000
per unit
K4/M30 rated bollards — stopping a 15,000 lb vehicle at 30 mph
$6,000–$12,000
per unit
K8/M40 rated bollards — stopping a 15,000 lb vehicle at 40 mph
$10,000–$25,000+
per unit
K12/M50 rated bollards — stopping a 15,000 lb vehicle at 50 mph with architectural finish
Pricing varies significantly based on crash rating, bollard style, foundation requirements, and site conditions. Detailed quoting requires a site visit and threat assessment. Contact us for a free, detailed estimate.
The Titan Advantage
Built to Last in Alberta's Toughest Conditions
Alberta's freeze-thaw cycles, heavy snowfall, and extreme temperature swings demand bollards engineered for durability. Every Titan Barriers installation uses galvanized steel, deep-set concrete footings, and professional anchoring to ensure your bollards perform year after year.
Certified, Not Claimed
Every crash rating is backed by independent full-scale vehicle crash test data — not theoretical calculations or marketing claims.
Exact Specification Compliance
We follow the manufacturer's certified foundation specification to the letter — preserving the crash rating and audit trail.
Complete Documentation
Photographic construction records, as-built drawings, and certification documents for security audit compliance.
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"After the news about daycare vehicle incidents, we needed bollards fast. Titan had them installed within a week across two locations. Parents noticed immediately and feel so much safer."
Jennifer L.
Daycare Owner, Edmonton
"After a vehicle jumped the curb near our entrance, we called Titan Barriers. They had bollards installed within the week. Fast, professional, and they look great."
Priya S.
Store Owner, Edmonton
Were we great to work with? Leave us a Google review →
What You Get
Key Benefits
ASTM F2656 certified vehicle-stopping performance
Full-scale crash test verification — not theoretical ratings
Engineered foundations with rebar cages and specified concrete
As-built documentation for security audit compliance
Available in utilitarian and architectural finishes
Stops deliberate high-speed vehicle attacks — not just low-speed bumps
Our Process
From Quote to Completion
A clear, professional process from first contact to finished installation.
Threat Assessment
Define the vehicle threat — weight, speed, and approach angle.
System Specification
Select certified bollard system and foundation design.
Engineered Installation
Rebar cage, formed concrete, and bollard set per certification.
Certification & Handoff
As-built documentation, photos, and compliance records.
Explore More
Related Services
Our Approach
Built on Practical Experience
No two sites are the same. We take the time to understand your layout, risks, and goals before recommending a solution.
Common Questions
Crash-Rated Bollards FAQ
Need Crash-Rated Bollards?
Contact Titan Barriers for a consultation on crash-rated bollard installation in Edmonton, Calgary, or anywhere in Alberta. We'll help you determine the right rating for your facility's threat profile.
Already a customer? Leave us a Google review