Asphalt Speed Bump Installation
Permanent, built-on-site asphalt speed bumps for commercial and industrial properties requiring maximum durability in high-traffic environments.
Specialized Protection
Asphalt Speed Bump Installation
Asphalt speed bumps are the most durable speed control solution available — built directly on your existing lot surface using hot-mix asphalt compacted to form a permanent, seamless speed bump that integrates with the surrounding pavement. Unlike bolt-down rubber alternatives, asphalt speed bumps are monolithic structures that withstand decades of heavy traffic without loosening, shifting, or requiring section replacement.
100%
Full-Service Install
AB
Alberta-Wide
What We Offer
Speed Bump Types
Titan Barriers builds custom asphalt speed bumps for commercial parking lots, warehouse yards, industrial facilities, and high-traffic properties across Edmonton, Red Deer, Calgary, and Lethbridge, and Alberta. Our asphalt speed bumps are constructed on-site to your exact specifications — custom lengths, heights, drainage channels, and profiles matched to your traffic conditions.
Standard Asphalt Bumps
Full-height asphalt speed bumps for parking lots and commercial properties — 3–6 inches tall, 12–14 inches wide, built for 5–10 km/h crossing.
Heavy-Duty Industrial Bumps
Reinforced asphalt speed bumps for warehouse yards and truck routes — thicker base construction to withstand concentrated heavy vehicle loads.
Drainage Channel Bumps
Speed bumps with built-in drainage channels for properties with water flow requirements — maintaining speed control without creating pooling.
Extended Width Humps
12–14 foot wide asphalt speed humps for private roads and through-traffic lanes — gentler profile for higher-speed environments.
Custom Profile Bumps
Speed bumps with custom heights and approach angles designed for specific vehicle types — emergency vehicles, delivery trucks, or school buses.
Resurfacing & Repair
Restoration of existing damaged asphalt speed bumps — rebuilding profiles worn down by years of traffic.
"We had rubber speed bumps that kept coming loose. Switched to asphalt from Titan — it's been four years, heavy truck traffic, and they look like the day they were built."
— Industrial Park Manager, Edmonton
Everything's Handled
Built On-Site to Last Decades
Asphalt speed bumps are constructed on-site using the same hot-mix asphalt materials and equipment used for road construction. Our crews build each bump layer-by-layer, compacting to density specifications that ensure 10–20+ years of service life under heavy traffic.
Every asphalt speed bump includes proper base preparation — cleaning and priming the existing surface to ensure a permanent bond between the bump and the lot. No tack coat shortcuts or cold-patch materials.
Completed bumps are painted with high-visibility traffic marking paint including approach lines and reflective elements. We handle the complete installation — no separate painting contractor needed.
Our Process
From Quote to Completion
A clear, professional process from first contact to finished installation.
Surface Prep
Clean, prime, and tack the existing surface.
Form Setup
Set temporary forms for precise bump profile.
Hot-Mix Paving
Layer and compact road-grade hot-mix asphalt.
Profile & Grade
Shape final profile and approach angles.
Why It Matters
Why Choose Asphalt Speed Bumps
Asphalt speed bumps are the longest-lasting speed control option — outlasting rubber alternatives by 2–3x in high-traffic commercial environments. They don't loosen from anchors, don't have modules that separate, and don't require section replacement. Once built, they perform for 10–20+ years with minimal maintenance.
Maximum Durability
10–20+ year lifespan under heavy commercial and industrial traffic — the longest-lasting option.
Heavy Vehicle Rated
Withstands concentrated truck and heavy equipment loads without compression or deformation.
Seamless Integration
Built with the same materials as your lot surface — no modules, bolts, or add-on appearance.
Built to Last
Road-Grade Hot-Mix Asphalt
We use the same road-grade hot-mix asphalt specified for municipal roads and highways. This isn't cold-patch or utility-grade material — it's full-temperature, plant-mixed asphalt compacted to density specifications that ensure maximum longevity.
Each speed bump is built on a primed and tacked base surface that creates a permanent molecular bond between the new asphalt and the existing lot. This prevents the edge separation and undermining that causes inferior speed bumps to crack and crumble.
The hot-mix formulation is specifically graded for Alberta's climate — using aggregate sizes and binder grades that resist cracking in winter cold and softening in summer heat. Combined with proper drainage, our asphalt speed bumps handle Alberta's extreme freeze-thaw cycles without deterioration.
"The difference between a properly built asphalt speed bump and a cold-patch one is night and day. Titan builds them like they're building a road — because that's exactly what they're doing."
— Civil Engineer, Edmonton
What You Get
Key Benefits
Longest lifespan — 10–20+ years in commercial environments
No bolts, modules, or components to loosen or replace
Handles heavy truck and equipment traffic without deformation
Seamless integration with existing asphalt surfaces
Custom heights, profiles, and drainage configurations
One-time investment — no ongoing replacement costs
Technical Details
Specifications & Standards
Full Transparency
By the Numbers
All-inclusive — materials, construction, markings, and cleanup.
Expected service life with proper construction and drainage.
Most asphalt speed bump projects completed in 1–2 days.
Trusted for permanent speed control across Alberta.
Asphalt bumps are cured and ready for traffic in 24 hours.
WCB covered and fully insured for all work.
Investment Guide
Asphalt Speed Bump Installation Cost
$500–$1,000
per unit
Standard Asphalt Speed Bumps — parking lots and commercial
$800–$1,500+
per unit
Heavy-Duty Asphalt Bumps — industrial and truck routes
$1,000–$3,000+
per unit
Speed Humps — wider profile for private roads
Pricing includes base preparation, hot-mix construction, compaction, markings, and cleanup. Volume pricing for multi-bump projects. Contact us for a free, detailed estimate.
The Titan Advantage
Built to Last in Alberta's Toughest Conditions
Alberta's freeze-thaw cycles, heavy snowfall, and extreme temperature swings demand solutions engineered for durability. Every Titan Barriers installation is built for long-term performance in the harshest conditions.
Permanent Solution
One-time construction that lasts 10–20+ years — no ongoing replacement costs.
Heavy Traffic Rated
Withstands heavy truck loads that would degrade rubber alternatives.
Custom Built
Built to exact specifications — length, height, drainage, and profile customized.
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"After the news about daycare vehicle incidents, we needed bollards fast. Titan had them installed within a week across two locations. Parents noticed immediately and feel so much safer."
Jennifer L.
Daycare Owner, Edmonton
"After a vehicle jumped the curb near our entrance, we called Titan Barriers. They had bollards installed within the week. Fast, professional, and they look great."
Priya S.
Store Owner, Edmonton
Were we great to work with? Leave us a Google review →
Alberta-Wide Service
Serving Communities Across the Province
From Edmonton and Calgary to Red Deer, Lethbridge, and everywhere in between — Titan Barriers delivers professional asphalt speed bump installation services backed by local expertise and national-grade standards.
Why Choose Titan
Built Different
Maximum expected lifespan with proper construction.
Ready for traffic 24 hours after construction.
All major Alberta centres served.
Our Approach
Built on Practical Experience
No two sites are the same. We take the time to understand your layout, risks, and goals before recommending a solution.
Common Questions
Asphalt Speed Bump Installation FAQ
Permanent Speed Control — Built to Last
Get a free estimate for asphalt speed bump construction at your property.
Already a customer? Leave us a Google review