Parkade & Parking Garage Speed Bumps
Low-profile bolt-down speed bumps designed for parkade concrete surfaces — controlling vehicle speeds in covered parking structures and underground garages.
Specialized Protection
Parkade Speed Bumps
Parkades and parking garages present unique speed control challenges that differ from surface parking lots. Concrete surfaces, tight turning radii, limited sightlines between levels, and pedestrians walking to elevators and stairwells in enclosed spaces all create elevated risk for vehicle-pedestrian incidents.
100%
Full-Service Install
AB
Alberta-Wide
What We Offer
Speed Bump Types
Titan Barriers installs bolt-down speed bumps specifically designed for parkade environments — concrete-rated anchoring systems, low-profile designs for clearance-sensitive garages, and high-visibility markings optimized for the artificial lighting conditions found in covered parking structures.
Level Transition Bumps
Speed bumps at ramp transitions between parkade levels — slowing vehicles before they enter occupied parking floors.
Pedestrian Crossing Bumps
Speed bumps at elevator lobbies, stairwell entrances, and designated pedestrian crossing points within the parkade.
Turning Lane Bumps
Speed bumps at sharp turns and blind corners where sightlines are limited and collision risk is highest.
Entry/Exit Bumps
Speed bumps at parkade entry and exit points to control vehicle speeds at the transition from street to garage.
Low-Profile Bumps
Reduced-height speed bumps for garages with tight vehicle clearances — effective speed control without scraping low vehicles.
Reflective Bumps
High-visibility speed bumps with reflective strips and paint markings optimized for parkade lighting conditions.
"Drivers were flying through our parkade — we had multiple near-misses with pedestrians at the elevator. Speed bumps at every level transition solved the problem immediately."
— Building Manager, Edmonton
Everything's Handled
Engineered for Concrete Surfaces
Parkade speed bumps require concrete-specific anchoring that differs from asphalt installations. We use heavy-duty concrete expansion anchors rated for the lateral forces generated by vehicles crossing at speed — ensuring bumps stay firmly secured to the slab.
Every parkade installation includes proper drainage consideration — speed bumps are positioned to avoid blocking water flow to floor drains and preventing puddle formation that creates slip hazards.
We coordinate with parkade management to section off installation areas while keeping remaining levels operational. Most parkade projects are completed in a single day.
Our Process
From Quote to Completion
A clear, professional process from first contact to finished installation.
Parkade Survey
Assess levels, turns, pedestrian zones, and clearances.
Placement Plan
Map bump locations at all critical conflict points.
Section & Install
Section off areas, keeping remaining levels open.
Anchor & Seal
Bolt-down with concrete anchors and seal edges.
Why It Matters
Why Parkades Need Speed Control
Enclosed parkade environments amplify the risk of vehicle-pedestrian incidents. Limited sightlines around corners, dim lighting, sound reverberation that masks approaching vehicles, and pedestrians focused on navigating to their cars all create conditions where speed-related incidents are more likely — and more dangerous — than in open parking lots.
Enclosed Safety
Enforce safe speeds in low-visibility enclosed environments where pedestrians and vehicles share tight spaces.
Liability Protection
Demonstrate duty of care with physical speed control at all critical conflict points in your parkade.
Zero Maintenance
No power, no software, no ongoing costs — bolt-down speed bumps provide passive, permanent speed control.
Built to Last
Concrete-Rated Components
Parkade installations use concrete-specific rubber speed bump modules with expansion anchor systems rated for structural concrete slabs. Unlike surface parking lot bumps that use asphalt anchors, parkade anchors are designed for the harder, less forgiving properties of concrete.
We select low-profile designs for garages with tight vehicle clearances — maintaining effective speed control without creating scraping issues for low-riding vehicles, SUVs with roof-mounted accessories, or delivery vehicles.
All parkade speed bumps include high-contrast reflective markings designed for artificial lighting environments. Standard outdoor markings can appear washed out under parkade fluorescent or LED lighting — our reflective elements are optimized for indoor visibility.
"The speed bumps look professional, the reflective markings are visible even in our older garage with dim lighting, and they've held up perfectly through three years of daily traffic."
— Condo Board Member, Edmonton
What You Get
Key Benefits
Control vehicle speeds in enclosed parking structures
Protect pedestrians at elevator lobbies and stairwells
Reduce speed-related incidents on parkade ramps and corners
Bolt-down installation — no excavation or wet concrete
Low-profile options for clearance-sensitive garages
High-visibility reflective markings for indoor lighting
Technical Details
Specifications & Standards
Full Transparency
By the Numbers
All-inclusive pricing — supply, install, markings, cleanup.
Most parkade speed bump projects completed in a single day.
Typical parkade level requires 3–8 speed bumps.
Trusted by parkade operators across Edmonton, Red Deer, and Calgary.
Bolt-down installation — no digging, no wet concrete.
WCB covered and fully insured for parkade work.
Investment Guide
Parkade Speed Bumps Cost
$300–$700
per unit
Standard Rubber Speed Bumps — bolt-down on concrete
$400–$900
per unit
Low-Profile Speed Bumps — for clearance-sensitive garages
$2,500–$12,000+
typical project
Multi-level parkade speed control system
Pricing includes supply, installation, concrete anchoring, markings, and cleanup. Multi-structure pricing available. Contact us for a free, detailed estimate.
The Titan Advantage
Built to Last in Alberta's Toughest Conditions
Alberta's freeze-thaw cycles, heavy snowfall, and extreme temperature swings demand solutions engineered for durability. Every Titan Barriers installation is built for long-term performance in the harshest conditions.
Concrete-Engineered
Anchoring systems designed specifically for structural concrete slabs.
Indoor Visibility
Reflective markings optimized for artificial parkade lighting.
No Wet Work
Bolt-down installation with no excavation or concrete pouring.
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"After the news about daycare vehicle incidents, we needed bollards fast. Titan had them installed within a week across two locations. Parents noticed immediately and feel so much safer."
Jennifer L.
Daycare Owner, Edmonton
"After a vehicle jumped the curb near our entrance, we called Titan Barriers. They had bollards installed within the week. Fast, professional, and they look great."
Priya S.
Store Owner, Edmonton
Were we great to work with? Leave us a Google review →
Alberta-Wide Service
Serving Communities Across the Province
From Edmonton and Calgary to Red Deer, Lethbridge, and everywhere in between — Titan Barriers delivers professional parkade speed bumps services backed by local expertise and national-grade standards.
Why Choose Titan
Built Different
Target speed for parkade traffic.
Levels stay operational during installation.
Edmonton, Red Deer, Calgary, Lethbridge, and all Alberta centres.
Our Approach
Built on Practical Experience
No two sites are the same. We take the time to understand your layout, risks, and goals before recommending a solution.
Common Questions
Parkade Speed Bumps FAQ
Speed Control for Your Parkade
Get a free assessment and estimate for parkade speed bump installation.
Already a customer? Leave us a Google review