Removable Bollard Installation
Pedestrian guidance and visual deterrence bollards that lock in place and lift out when you need access. Ideal for residential driveways, seasonal areas, and low-speed pedestrian zones. Serving Edmonton, Calgary, Red Deer, and Lethbridge.
Specialized Protection
Removable Bollards
Removable bollards use a receiver sleeve embedded in the ground with a bollard post that locks into position and can be lifted out by authorized personnel. Important: removable bollards are designed for pedestrian guidance and visual deterrence — they are NOT engineered to stop a vehicle. Because the bollard post is not permanently embedded in concrete, it does not have the same stopping power as a fixed bollard. If your primary goal is vehicle-stopping protection, fixed bollards are the correct product.
350+
Colour Options
100%
Full-Service Install
What We Install
Removable Bollards Bollard Solutions
Removable bollards are most commonly requested for residential driveways, private lanes, gated entrances, and seasonal access points where the goal is to control pedestrian flow, mark boundaries, and visually deter casual vehicle entry — not to physically stop a vehicle at speed. For most commercial properties in Edmonton and Calgary, fixed bollards are the better choice — they cost less per unit, require zero maintenance, provide permanent vehicle-stopping protection, and don't rely on someone remembering to replace the bollard after removal.
Residential Driveway Access
Removable bollards at residential driveways and private entrances providing visual boundary marking and pedestrian guidance with the ability to lift out for vehicle access.
Seasonal Patio Guidance
Bollards that visually define outdoor dining patios during restaurant season and can be removed for winter snow clearing or off-season parking.
Pedestrian Zone Marking
Removable bollards marking pedestrian-only zones in low-speed areas — providing visual guidance and boundary definition, not vehicle-stopping protection.
Event Venue Access
Removable bollard lines at event venues, markets, and public spaces that visually control pedestrian flow and can be removed for setup/teardown.
Service & Maintenance Access
Bollards at utility areas and service corridors that authorized crews can remove as needed — for visual deterrence in low-traffic zones.
Loading Zone Marking
Removable bollards visually defining loading zones and delivery areas — suitable for low-speed environments where pedestrian guidance is the priority.
Free Tool · 60 Seconds
Not sure how many bollards you need?
Try our free Bollard Calculator — answer 6 quick questions and get a tailored recommendation: bollard count, diameter, spacing, foundation, finish, and excavation method. Built for Alberta commercial sites.
"We needed bollards we could remove for deliveries but lock in place the rest of the time. Titan's system is dead simple — lift, lock, done. And they actually drain properly in winter."
— Operations Manager, Edmonton
Everything's Handled
Lock-In, Lift-Out — It's That Simple
Every removable bollard installation includes the receiver sleeve, locking mechanism, bollard post, and all mounting hardware. We set the receiver flush with the finished grade and include a drainage pathway at the base to prevent water pooling and ice formation — a step most installers skip that causes seized bollards in Alberta winters.
We provide two keys per removable bollard and can key multiple bollards alike so a single key operates your entire system. Lost keys? We maintain records of your keying configuration and can supply replacements.
When the bollard is removed, a flush-mount cap covers the receiver sleeve — maintaining a clean surface for vehicles and pedestrians. No trip hazards, no open holes.
Why Choose Titan
Built Different
Every project starts with a no-cost evaluation of your access control needs and site layout.
Open and close vehicle access points in seconds — without tools, concrete cutting, or contractor calls.
Removable bollards provide pedestrian guidance and visual deterrence — they are NOT designed to stop a vehicle.
Heavy-duty locking mechanisms prevent unauthorized removal while allowing quick access for key holders.
Drainage and anti-seize systems engineered specifically for Alberta's freeze-thaw conditions.
Headquartered in Edmonton with crews serving all of Alberta including Calgary, Red Deer, and Lethbridge.
Why It Matters
Visual Deterrence — Not Vehicle Stopping
Removable bollards are designed for pedestrian guidance and visual deterrence — they mark boundaries, guide foot traffic, and visually discourage casual vehicle entry. They are not engineered to physically stop a moving vehicle. If your property requires actual vehicle-stopping capability for insurance compliance, building code requirements, or protection of occupied buildings, fixed bollards are the correct product. We will always tell you this upfront.
Pedestrian Guidance
Mark walkways, boundaries, and pedestrian zones with visible, professional bollard lines that guide foot traffic.
Visual Deterrence
Deter casual vehicle entry into restricted areas — but understand these are not designed to physically stop a vehicle at speed.
Seasonal Flexibility
Adapt your property layout for patios, events, snow clearing, and operational changes throughout the year.
Built to Last
Built for Alberta's Freeze-Thaw Reality
Removable bollard systems face a unique challenge in Alberta: water intrusion into the receiver sleeve during rain and snowmelt, followed by freezing temperatures that can seize the bollard in place. We address this with a gravel drainage bed beneath the receiver and a weep channel that prevents standing water — a detail that distinguishes professional installation from amateur work.
Both the bollard post and receiver sleeve are hot-dip galvanized to prevent corrosion at the contact surfaces. The locking pin and mechanism use stainless steel components that resist corrosion and maintain smooth operation across thousands of lock/unlock cycles.
We apply anti-seize compound to all internal contact surfaces during installation and recommend annual reapplication — a 5-minute task that keeps your removable bollards operating smoothly for decades.
"Had removable bollards from another company that froze solid every winter. Titan replaced them with proper drainage and anti-seize treatment. Haven't had a single freeze-up in two years."
— Facility Manager, Red Deer
Know Before You Buy
Removable Bollards Are NOT Vehicle Barriers
Removable Bollards Won't Stop a Vehicle
This is the most important thing to understand: removable bollards are designed for pedestrian guidance and visual deterrence — not vehicle stopping. Because the bollard post lifts out of a receiver sleeve rather than being permanently embedded in concrete, it does not have the structural integrity to withstand vehicle impact. If a vehicle strikes a removable bollard, the post will likely bend, eject from the receiver, or collapse — offering little to no protection. If your goal is to stop a vehicle, you need fixed bollards with 42–48 inch concrete footings. A removable bollard that creates a false sense of security is more dangerous than no bollard at all.
Receiver Depth Is 24–36 Inches — Not 42–48
Removable bollard receivers are set 24–36 inches deep — significantly shallower than the 42–48 inch footings used for fixed bollards. This shallower depth is appropriate because the bollard's function is visual deterrence and pedestrian guidance, not impact resistance. Contractors who claim their removable bollards provide 'the same stopping power as fixed bollards' are either uninformed or misleading you. The physics don't lie — a bolt that slides into a sleeve cannot match a post permanently embedded in 4 feet of concrete.
If You Need Vehicle Protection — Choose Fixed
For commercial properties, fixed bollards are almost always the right answer — lower cost, zero maintenance, and genuine vehicle-stopping protection. Removable bollards make sense for residential driveways, seasonal access points, and locations where occasional vehicle access is genuinely needed and vehicle-stopping capability is not the requirement. If an insurance company, security assessment, or building code requires vehicle barrier protection, removable bollards will not satisfy that requirement. We will always be honest about this — even if it means recommending a different product.
Material Specifications
Specifications & Materials
Full Transparency
By the Numbers
Removable bollards start at $700 per unit including receiver sleeve, locking mechanism, and installation.
Every removable bollard comes with two keys — additional keys and keyed-alike configurations available.
A trained operator can unlock and remove a bollard in approximately 30 seconds.
Receiver sleeves are set in concrete footings 24–36 inches deep — shallower than fixed bollards as these are designed for pedestrian guidance, not vehicle stopping.
Flush-mount receiver caps sit level with the finished grade — no trip hazards or open holes.
Both the bollard post and receiver sleeve are hot-dip galvanized for corrosion-free performance.
Investment Guide
Removable Bollards Cost
$700–$950
per unit
4" removable bollards with receiver sleeve and locking mechanism — suitable for pedestrian guidance and visual deterrence
$950–$1,300
per unit
6" removable bollards — the standard for loading zones, residential driveways, and seasonal access points
$1,300–$1,800+
per unit
8" heavy-duty removable bollards — maximum visual presence with full access control capability
All prices include supply, receiver sleeve, locking hardware, drainage provisions, installation, and cleanup. Keyed-alike pricing available for multi-bollard systems. Remember: removable bollards are for pedestrian guidance and visual deterrence — if you need vehicle-stopping protection, fixed bollards are the right product. Contact us for a free, detailed estimate.
The Titan Advantage
Built to Last in Alberta's Toughest Conditions
Alberta's freeze-thaw cycles, heavy snowfall, and extreme temperature swings demand bollards engineered for durability. Every Titan Barriers installation uses galvanized steel, deep-set concrete footings, and professional anchoring to ensure your bollards perform year after year.
Drainage Engineering
Gravel beds and weep channels beneath every receiver prevent the freeze-ups that plague poorly installed removable bollards.
Keyed-Alike Systems
We configure multi-bollard installations with a single key for operational simplicity — no fumbling with different locks.
Winter-Proven
Anti-seize treatment and drainage design tested through Alberta's -40°C winters — your bollards operate year-round.
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"After the news about daycare vehicle incidents, we needed bollards fast. Titan had them installed within a week across two locations. Parents noticed immediately and feel so much safer."
Jennifer L.
Daycare Owner, Edmonton
"After a vehicle jumped the curb near our entrance, we called Titan Barriers. They had bollards installed within the week. Fast, professional, and they look great."
Priya S.
Store Owner, Edmonton
Were we great to work with? Leave us a Google review →
What You Get
Key Benefits
Pedestrian guidance and visual boundary marking
NOT designed for vehicle-stopping — use fixed bollards for impact protection
Flush-mount caps eliminate trip hazards when bollards are removed
Keyed-alike option for single-key operation of multiple bollards
Drainage-ready receivers prevent freeze-ups in Alberta winters
Same galvanized steel construction as permanent fixed bollards
Our Process
From Quote to Completion
A clear, professional process from first contact to finished installation.
Access Assessment
Identify which access points need removable vs. fixed bollards.
Receiver Specification
Determine sleeve depth, drainage, and keying configuration.
Installation
Set receivers, install drainage, mount bollards, and test locks.
Keys & Training
Provide keys, demonstrate operation, and document the system.
Explore More
Related Services
Our Approach
Built on Practical Experience
No two sites are the same. We take the time to understand your layout, risks, and goals before recommending a solution.
Common Questions
Removable Bollards FAQ
Need Removable Bollards Installed?
Get a free estimate for removable bollard installation in Edmonton, Calgary, Red Deer, or Lethbridge. Professional installation by Titan Barriers — with drainage engineering that works in Alberta winters.
Already a customer? Leave us a Google review