Speed Bump Removal & Surface Restoration
Professional removal of outdated, damaged, or misplaced speed bumps with complete surface restoration — returning your pavement to a smooth, clean condition.
Specialized Protection
Speed Bump Removal
Speed bumps don't last forever, and they don't always stay in the right location. Lot reconfiguration, tenant changes, excessive wear, or poorly placed original installations all create the need for professional speed bump removal and surface restoration. Removing a speed bump improperly can leave unsightly scars, trip hazards, and drainage problems on your property.
100%
Full-Service Install
AB
Alberta-Wide
What We Offer
Speed Bump Types
Titan Barriers provides professional speed bump removal for rubber, asphalt, and concrete speed bumps across Edmonton, Red Deer, Calgary, and Lethbridge, and Alberta. We don't just remove the bump — we restore the surface to a clean, smooth condition that matches the surrounding pavement.
Rubber Bump Removal
Unbolting and removal of modular rubber speed bumps with anchor hole filling and surface sealing.
Asphalt Bump Removal
Milling or grinding of permanent asphalt speed bumps with surface restoration to match the surrounding pavement.
Concrete Bump Removal
Cutting and removal of concrete speed bumps with patching and finishing to restore the original surface.
Bolt Extraction
Extraction of remaining anchor bolts and hardware from previous speed bump installations — eliminating trip hazards.
Surface Patching
Asphalt or concrete patching to fill voids and restore smooth pavement where speed bumps were removed.
Paint Removal
Removal of speed bump paint markings, approach lines, and signage associated with the removed speed bumps.
"The old speed bumps were crumbling and in the wrong spots after our lot was reconfigured. Titan removed them, patched everything, and installed new ones in the right locations — all in one day."
— Property Manager, Red Deer
Everything's Handled
Complete Removal & Restoration
Speed bump removal isn't just about taking the bump off the surface — it's about restoring the pavement to a condition that's safe, clean, and visually consistent with the surrounding area. Leftover anchor bolts, patching scars, and paint remnants are all issues we address.
For rubber speed bumps, we unbolt modules, extract concrete anchors, fill anchor holes with matching compound, and seal the surface. For asphalt bumps, we mill or grind the material down to the original surface level and patch any voids.
If you're replacing speed bumps with new installations in different locations, we can bundle removal and new installation into a single project for cost efficiency.
Our Process
From Quote to Completion
A clear, professional process from first contact to finished installation.
Assessment
Evaluate bump type, condition, and removal method.
Area Prep
Section off work zone and protect adjacent surfaces.
Removal
Remove speed bump material and all hardware.
Surface Restore
Patch, fill, and seal to match existing pavement.
Why It Matters
When Speed Bumps Need to Go
Speed bumps may need removal for several common reasons: lot reconfiguration that changes traffic patterns, damage from snowplows or heavy equipment that creates safety hazards, tenant or use changes that make speed bumps unnecessary, or poorly placed original installations that created problems instead of solving them.
Eliminate Hazards
Remove damaged, crumbling, or exposed speed bumps that create trip and vehicle damage risks.
Lot Reconfiguration
Clear speed bumps that no longer align with updated traffic patterns and lot layouts.
Surface Restoration
Return pavement to a smooth, clean condition — not just bump removal.
Built to Last
Matching Your Existing Surface
Surface restoration after speed bump removal uses materials matched to your existing pavement — asphalt patching compound for asphalt surfaces, concrete fill for concrete surfaces, and appropriate sealers for both. The goal is a restored surface that's visually consistent with the surrounding area.
For rubber speed bump removal, anchor holes are filled with concrete patching compound on concrete surfaces or asphalt filler on asphalt surfaces, then sealed to prevent water infiltration that can cause potholes.
If you're combining removal with new speed bump installation at updated locations, we coordinate both projects to minimize total disruption and mobilization costs.
"You can barely tell where the old speed bumps were — the patching matches the lot perfectly. Much better than the eyesore we had before."
— Building Owner, Edmonton
What You Get
Key Benefits
Eliminate trip hazards from damaged or crumbling speed bumps
Restore smooth pavement surface after removal
Remove exposed bolts and anchor hardware
Clear outdated speed bumps for lot reconfiguration
Combine removal with new installation for efficiency
Professional paint and marking removal included
Technical Details
Specifications & Standards
Full Transparency
By the Numbers
All-inclusive — removal, restoration, cleanup included.
Most speed bump removal projects completed in a single day.
Pavement restored to match surrounding surface.
Trusted for removal and restoration across Alberta.
Combine removal with new installation for cost savings.
WCB covered and fully insured.
Investment Guide
Speed Bump Removal Cost
$200–$500
per unit
Rubber Speed Bump Removal — unbolt, extract, patch
$400–$1,000+
per unit
Asphalt Speed Bump Removal — mill, patch, seal
$2,000–$8,000+
typical project
Multi-bump removal with complete surface restoration
Pricing includes removal, surface restoration, paint removal, and cleanup. Bundle with new installation for savings. Contact us for a free, detailed estimate.
The Titan Advantage
Built to Last in Alberta's Toughest Conditions
Alberta's freeze-thaw cycles, heavy snowfall, and extreme temperature swings demand solutions engineered for durability. Every Titan Barriers installation is built for long-term performance in the harshest conditions.
Full Restoration
Not just removal — complete surface patching and sealing included.
Same-Day Service
Most removal projects completed in a single day.
Bundle & Save
Combine removal with new installation for reduced mobilization costs.
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"Titan Barriers installed bollards around our entire warehouse facility. Professional crew, clean work, and done ahead of schedule. Couldn't be happier."
Mark R.
Facility Manager, Edmonton
"After the news about daycare vehicle incidents, we needed bollards fast. Titan had them installed within a week across two locations. Parents noticed immediately and feel so much safer."
Jennifer L.
Daycare Owner, Edmonton
"After a vehicle jumped the curb near our entrance, we called Titan Barriers. They had bollards installed within the week. Fast, professional, and they look great."
Priya S.
Store Owner, Edmonton
Were we great to work with? Leave us a Google review →
Alberta-Wide Service
Serving Communities Across the Province
From Edmonton and Calgary to Red Deer, Lethbridge, and everywhere in between — Titan Barriers delivers professional speed bump removal services backed by local expertise and national-grade standards.
Why Choose Titan
Built Different
Most removal projects completed same-day.
Surface matched to surrounding pavement.
All major Alberta centres served.
Our Approach
Built on Practical Experience
No two sites are the same. We take the time to understand your layout, risks, and goals before recommending a solution.
Common Questions
Speed Bump Removal FAQ
Remove & Restore — Done Right
Get a free estimate for speed bump removal and surface restoration.
Already a customer? Leave us a Google review